Wardrobe Designer Pro

Wardrobe Identity

Name Code prefix

Wardrobe no. Show piece numbers

Wardrobe Units (Side-by-Side)

Each card is one complete almirah unit with its own dimensions and settings.

Global Settings

These settings apply to all wardrobe units.

Joinery Type Shelf clearance from partition (mm)

Default drawer fillers per side

Back Ply Options

Method Descriptions:

After Side: Back ply nailed behind sides. Partitions/shelves depth = Side depth (no reduction).
Pattam: Socket in sides/top/bottom. Partitions/shelves depth = Depth − Back Ply.
Groove: Channel cut at distance. Partitions/shelves depth = Depth − (Groove Dist + Back Ply + Margin).

Groove Settings (when using Groove method):

Groove distance from back (mm) Margin (mm)

Partition/Shelf Depth Formula:

• After Side: Depth (same as side depth)

• Pattam: Depth − Back Ply

• Groove: Depth − (Groove Distance + Back Ply + Margin)

Back Ply Coverage

Coverage (Base) Split mode

Profile Light Markings

Enable Profile Light Profile Light Size

Edge Banding

Carcass Edge Banding

Add carcass tape Tape thickness (mm)

Front edge reduced by 2× tape thickness.

Shutter Edge Banding

Add shutter tape Tape thickness (mm)

Materials

Carcass material Shutter material

Back ply material

Visible Sides (Laminate)

Enable visible laminate

Shutter Settings

Door count is set per unit. These settings apply to all units.

Gap between doors (mm) Side gap (mm)

Show handles Grip type

Handle position Profile direction

Show hinges

Glass Shutters

Enable glass shutters Glass shutter numbers (CSV) Extra gap for glass shutters (mm)

Loft Section

Enable loft Loft height (mm)

Gap below loft (mm) Same depth as base

Same width as base Same doors as base

Loft Internal

Loft Shelves Loft Partitions

Partitions

Compartments Configuration

Carcass Laminate Glass Partitions Hanging Drawer Shelf Position